Контурная пластика полного цикла: от первого визита до введения филлера

What interests you as a specialist in aesthetic medicine? You are looking for an algorithm that will allow you to get the best results for all patients.

Is it possible? Probably not…

But since we've started this conversation, there are some secrets that will make your work more efficient.

In this article on estet-portal.com we will analyze what a full cycle should be working with a client during contouring, how to select the best products for the job, and how to simplify complex tasks during filler injections.

Planning a treatment with hyaluronic acid fillers

The secret of successful correction with fillers is clear planning of work with the client.

The interaction between the aesthetic medicine specialist and the patient begins with the correct adherence to the cycle of correction with dermal fillers, the main stages of which are:

  • consulting;
  • preparatory procedures (superficial anesthesia and disinfection);
  • filler injection;
  • post-procedural care (massage, antibiotics, etc.);
  • observation;
  • adviseds.

Technique for effectively removing forehead wrinkles

How to choose a reliable dermal filler for contouring

After analyzing the problem that the patient has addressed, the doctor can start planning the procedure.

The choice of filler plays an important role in this process.

Dermal filler should be:

  • non-infectious;
  • hypoallergenic;
  • non-teratogenic;
  • non-carcinogenic;
  • non-migratory;
  • predictable action;
  • sustainable (guarantee long-term effect);
  • FDA approved.

But, unfortunately, there is not a single filler in the world that meets all these characteristics. However, it is possible to choose the best one.

You may also be interested in: Fundaro Salvatore: An anatomical approach to facial correction

Preference should be given to fillers from well-known manufacturers, for example, Yvoire fillers are made by LG, whose reputation is worth a lot.

Fillers must also be reliable, effective and, most importantly, have a proven safety profile.

Fillers Yvoire over 14 years of active use in various fields of medicine have shown compliance with all thesethem three most important characteristics.

The official distributor of Yvoire fillers is Academy of Scientific Beauty.

My default image

Filler injection: needle cut location, injection depth

For successful correction, you need not only to choose a good remedy, but also to use the correct technique.

For example, the location of the cut of the needle during the injection can affect the outcome of the procedure.

My default image

Slice Top: most commonly used method;

Inferior cut: it is advisable to perform the filler injections with the cut down cut immediately after inserting the needle with the cut up cut to avoid damage when injecting into the upper dermis;

Side cut: Since implants are inserted more sideways than up or down, this technique is useful when correcting a large area.

Determination of the injection depth is also an important point of correction, because denser fillers are injected deeper, while less dense ones are also suitable for superficial injections.

For example, Yvoire Hydro works as a biorevitalizant moisturizing the skin, therefore it is injected superficially, but Yvoire Volume is the most dense filler, which provides a long-lasting effect of filling the cheeks, cheekbones and chinka, injected subdermally.

Read the most interesting articles in Telegram!

How to know where the needle is during an injection

My default image

For proper regulation injection depth follow these tips.

Depending on the angle of the needle and the surface of the skin, the injection level can be determined:

  • Upper dermis (when injected at an angle of 10-15°);
  • Middle and lower layers of the dermis (when injected at an angle of 10-30°);
  • Subcutaneous layer (when injected at an angle greater than 30°).

When inserting the needle and lifting it slightly:

  • The needle has a bluish tinge – it is located in the upper layer of the dermis;
  • The contours of the needle are clearly visible - the middle and lower layers of the dermis;
  • The whole skin rises - the subcutaneous layer.

The correct algorithm of interaction with the patient, individual assessment of his needs, ideally selected high-quality dermal filler and the correct technique of its introduction will ensure aesthetic and lasting results.

Global rejuvenation: contouring of the middle third of the face

Add a comment

captcha

RefreshRefresh